Return to Mazda Miata Middle and Lower Timing Belt Cover Set 1990 - 2005 Rspeed (No Bolts Included)

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 1

0 of 0 people found the following review helpful:

Came as advertised! September 23, 2023 Reviewer: Aubrey Corcoran from Gainesville, FL United States   Was this review helpful to you?

0 of 0 people found the following review helpful:

Too much adjustment needed April 28, 2023 Reviewer: Austib from NC   There's so much excess plastic, I don't even want to call it flashing. There's about a 1/16 of an inch layer of extra plastic right where the lower cover seats by the crank pulley. So much that I had to shave it away carefully with an Xacto. As far as I'm concerned, that counts as "does not fit", especially combined with the fact that it has to be fit into place with a mallet because the guides are all slightly off. Save yourself the headache and get OEM, who cares that it's $50 per piece. Was this review helpful to you?

0 of 0 people found the following review helpful:

Exactly What I Wanted July 16, 2022 Reviewer: Kevin Harris from Houston, TX United States   I needed some parts, preferably new plastic parts, and RSpeed delivered! Most people complained about the factory covers being too brittle, but what do you really expect of old plastic that is constantly exposed to engine bay heat? I decided to buy new and RSpeed has availability and a good price. Every hole matched up and I had no clearance issues. Was this review helpful to you?

0 of 0 people found the following review helpful:

Quality plastics, fitment issues. February 24, 2022 Reviewer: Christopher Backhus from Centennial, CO United States   I really like the plastic quality but the lower cover is warped a bit and contacts the timing belt Not badly, Im hoping it self clearances.... Was this review helpful to you?

0 of 0 people found the following review helpful:

Good quality parts, slight misalignment December 21, 2021 Reviewer: Jackson F. from Southern California, United States   I had a gas leak on my passenger side fuel damper that did a number on my OEM timing cover rubber seals, so I purchased these replacements. The parts are high quality, but don't fit quite as well as OEM. They are 100% functional, no rubbing on the belt etc, but some of the seals had to be really persuaded and fiddled with to sit correctly. Other than that, there was still a decent amount of plastic flash from the injection molding process that for the most part didn't interfere with installation or function, except in the little alignment notch where the upper cover aligns with the lower cover. There, I used a razor blade and trimmed the flash away. Was this review helpful to you?

0 of 0 people found the following review helpful:

January 9, 2021 Reviewer: Casey Gerard from Cedar Park, TX United States   Was this review helpful to you?

0 of 0 people found the following review helpful:

December 14, 2020 Reviewer: Isaiah Becker from Dacula, GA United States   Perfect replacement for old and worn oem covers. Was this review helpful to you?