NEW: Includes upgraded V3 universal mount or Magsafe mount (no charging).
Exclusive Smart phone / mobile phone mount, specially developed for the Mazda® MX-5 ND left hand drive models. Please note this does not fit the Fiat 124 Spider or Abarth models.
No drilling or gluing required, and easy installation makes this a perfect addition for your MX-5.
This mobile phone mount is installed in under 2 minutes and can be removed at any time without leaving marks!
The universal mount will fit mobile devices up to 3.5" (90mm) wide and has an adjustable lower grip to help center your phone in the mount. The lower grip also has a slot to easily accommodate a charging cable to be plugged in.
The Magsafe mount is compatible with all Magsafe equipped mobile devices and includes an adhesive ring to adapt other mobile devices to the mount. Note that this does not supply wireless charging.
To install read the following steps or follow the video below:
- pull lower left corner of the passenger side of the dashboard (right beside the center console) towards you in a short pull, creating a small gap big enough to insert the metal hook supplied with this kit.
- insert the metal hook sideways between the lower part of the dashboard and the upper part, next to the shiny black plastic of the center console vents. Don't drop it!
- turn the hook 90° and pull to check if hooks snaps into place and holds position correctly. Don't Drop it!
- push the lower part of the dashboard back into the original position. Don't drop the hook!
- position the phone mount over the extending hook on the dashboard and put the supplied nut on the hook part and screw hand tight.
- check if the console sits tightly and adjust when necessary
- mount the supplied universal phone holder and enjoy!
* pictured mobile phone is not part of this kit and used for reference purposes only!
Caution: Only for left-hand drive models!
RSpeed ND Phone Holder Installation
To install read the following steps:
- pull lower right side of the dashboard (right beside the center console) towards you in a short pull, creating a small gap big enough to insert the metal hook supplied with this kit.
- insert the metal hook sideways between the lower part of the dashboard and the upper part, next to the shiny black plastic of the center console vents. Don't drop it!
- turn the hook 90° and pull to check if hooks snaps into place and holds position correctly. Don't Drop it!
- push the lower part of the dashboard back into the original position. Don't drop the hook!
- position the phone mount over the extending hook on the dashboard and put the supplied nut on the hook part and screw hand tight.
- check if the console sits tightly and adjust when necessary
- mount the supplied universal phone holder and enjoy!